S3D100v1
Function Description
POWER Turn unit power On or Off, depending on its current state.
POWER : Unit is ON (blue LED on front lit).
POWER : Unit is OFF (blue LED on front not lit).
SYNC UP /
SYNC DOWN
Change the synchronization line for the glasses emitter.
SYNC UP : Line number for synchronization is incremented.
SYNC DOWN : Line number for synchronization is decremented.
GLASSES SWAP Invert the left and right eye on the glasses.
GLASSES SWAP : Left eye frame is now displayed on the right eye on the glasses.
GLASSES SWAP : Left eye frame is displayed back to the left eye on the glasses.
FLICKER FILTER Cycle through the available flicker reduction filters.
FLICKER FILTER : Flicker filter enable, low mode.
FLICKER FILTER : Flicker filter enable, medium mode.
FLICKER FILTER : Filcker filter enable, high mode.
FLICKER FILTER : Flicker filter disable.
S3D100v2
Function Description
POWER Turn unit power On or Off, depending on its current state.
POWER : Unit is ON (blue LED on front lit).
POWER : Unit is OFF (blue LED on front not lit).
SYNC UP /
SYNC DOWN
Change the synchronization line for the glasses emitter.
SYNC UP : Line number for synchronization is incremented.
SYNC DOWN : Line number for synchronization is decremented.
GLASSES SWAP Invert the left and right eye on the glasses.
GLASSES SWAP : Left eye frame is now displayed on the right eye on the glasses.
GLASSES SWAP : Left eye frame is displayed back to the left eye on the glasses.
FLICKER FILTER Cycle through the available flicker reduction filters.
FLICKER FILTER : Flicker filter enable, low mode.
FLICKER FILTER : Flicker filter enable, medium mode.
FLICKER FILTER : Filcker filter enable, high mode.
FLICKER FILTER : Flicker filter disable.
MARGIN LEFT/
MARGIN RIGHT
Change the masking margin.
MARGIN LEFT : The left masking margin is decremented or the right masking margin is
incremented
MARGIN RIGHT : The right masking margin is decremented or the left masking margin is
incremented.
VIDEO OUTPUT
FORMAT
Change the video format of the output signal.
VIDEO OUTPUT FORMAT : Video output format is switched to COMPONENT.
VIDEO OUTPUT FORMAT : Video output format is switched to RGBHV.
S3D100v3
Function Description
POWER Turn unit power On or Off, depending on its current state.
POWER : Unit is ON (blue LED on front lit).
POWER : Unit is OFF (blue LED on front not lit).
SYNC UP /
SYNC DOWN
Change the synchronization line for the glasses emitter.
SYNC UP : Line number for synchronization is incremented.
SYNC DOWN : Line number for synchronization is decremented.
GLASSES SWAP Invert the left and right eye on the glasses.
GLASSES SWAP : Left eye frame is now displayed on the right eye on the glasses.
GLASSES SWAP : Left eye frame is displayed back to the left eye on the glasses.
FLICKER FILTER Cycle through the available flicker reduction filters.
FLICKER FILTER : Flicker filter enable, low mode.
FLICKER FILTER : Flicker filter enable, medium mode.
FLICKER FILTER : Filcker filter enable, high mode.
FLICKER FILTER : Flicker filter disable.
MARGIN LEFT/
MARGIN RIGHT
Change the masking margin.
MARGIN LEFT : The left masking margin is decremented or the right masking margin is
incremented
MARGIN RIGHT : The right masking margin is decremented or the left masking margin is
incremented.
VIDEO OUTPUT
FORMAT
Change the video format of the output signal.
VIDEO OUTPUT FORMAT : Video output format is switched to COMPONENT.
VIDEO OUTPUT FORMAT : Video output format is switched to RGBHV.
RESET DEFAULTS Reset internal values to factory default.
RESET DEFAULTS : Brightness, contrast, saturation and synchronization line are reset to their
factory defaults.
BRIGHTNESS Switch keypad to brightness control.
BRIGHTNESS : Keypad can now be used to enter brightness values.
CONTRAST Switch keypad to contrast control.
CONTRAST : Keypad can now be used to enter contrast values.
SATURATION Switch keypad to saturation control.
SATURATION : Keypad can now be used to enter saturation values.
SYNC Switch keypad to synchronization line controls.
SYNC : Keypad can now be used to enter synchronization line values.
KEYPAD 0-9 Values entering keypad for brightness, contrast, saturation and
synchronization line.
CONTRAST – 0 – 1 – 0 : Contrast value is now 10. Values can range from 0 to 255.
CONTRAST – 1 – 6 – 4 : Contrast value is now 164. Values can range from 0 to 255.
SYNC – 2 – 5 – 8 : Synchronization line is now 258. Values can range from 0 to 524.
